• This adhesive is suitable for two curing methods both by UV light and by humidity;
• It has medium viscosity with one component, solvent-free base on modified acrylate.

• This adhesive is suitable for both curing methods by UV light and by the heat addition;
• It’s just one component base on modified polycarbamine acid with dual curing features.

Introduce:

• This adhesive suitable for both curing methods by UV light and by visible light in a short time;
• It’s just one component base on modified urethane acrylate, high viscosity.
• Multipurpose, especially for the bonding of membranes and coils in mini loudspeakers;
• Good adhesion to plastics like PEEK, PEN, PEI, and PAR;

• This is an adhesive suitable for both curing methods by UV light and by the visible light;
• It’s just one component base on modified urethane acrylate, high viscosity;
• Multipurpose, especially for interior plastic/plastic, glass/plastic bondings e.g., bonding of glass into plastic frames or clips to glass.

• This adhesive is suitable with curing methods by UV light and can be activated by visible light;
• Multipurpose, especially for tensile-equalizing bonding and sealing, in particular in the case of high-temperature fluctuations at the component.

DELOLUX 820 lamp system allows fast curing and reliability, especially suitable for encapsulating chip application with DELO adhesive. This lamp allows achieving maximal energy intermediate start. Besides, DELOLUX 820 give UV light to continue for a long time approximate 20000 hours under normal condition.

• This adhesive is suitable with both curing methods by UV light and by visible light;
• Multipurpose, especially for peel-resistant plastic bondings e.g., bonding of membrane foils into loudspeaker baskets or bonding of coils to membranes.

• This is the glue that is compatible with both UV light and low temperature curing methods (+80^oC);
• The ingredient is just one component based on polycarbaminacid being modified, non-solvent.
• Non-halogen by the criteria of IEC 61248-2-21;
• Compliant with RoHS 2015/863/EU;
• The adhesive is supplied ready to use, to achieve the best performance, it can be dispensed by injection systems or use metal injection needles.

DELO DUALBOND IC4753 is an isotropic electrically conductive adhesive by adding conductive silver particles (Ag) to the glue, so the glue has very high conductivity, the volume resistance is only about 0.1 mOhm.cm.

• Solvent-free, 1-component, modified acrylate adhesive;
• Glue has catalytic properties, prevents sagging when applying glue;
• The glue can be quickly fixed by UV light in just a few seconds, and then dried at low temperature;
• Compliant with RoHS 2015/863/EU standard;
• Halogen-free according to IEC 61249-2-21.

- DELO-ML DB133 is a modified acrylate adhesive that cures under anaerobic conditions, especially compatible with metal surfaces, quickly fixed by UV light;

- Cured products are generally used in the temperature range of -40 °C to +150 °C; depending on the application, other limits may be more reasonable;

- Complies with RoHS directive 2015/863/EU;

- Compliant with VOC content limit according to GB33372-2020 regulation.